Water Drainage - Global 600506 Owner's Manual

INSTALLATION INSTRUCTIONS
The drain plug
13
Remove the
drain plug
Fig.21a
Fig.21b
Continuous
drain hose
Fig.22
Fig.23

Water drainage:

- During dehumidifying modes, remove the drain
plug from the back of the unit, install the drain
connector(5/8 universal female mender) with
3 4 hose(locally purchased). For the models
without drain connector, just attach the drain
hose to the hole. Place the open end of the
hose directly over the drain area in your
basement floor. Please refer to Fig.21a&b&22.
Make sure the connection of the drain hose and
the hole of the unit is tight and do not let the water
leak.
- When the water level of the bottom tray reaches
a predetermined level,
the digital display area shows P1 . At this time
the air conditioning/dehumidification process will
immediately stop. However, the fan motor will
continue to operate(this is normal).
Carefully move the unit to a drain location,
remove the bottom drain plug and let the
water drain away(Fig.23). Restart the machine
until the P1 symbol disappears. If the error
repeats, call for service.
NOTE: Be sure to reinstall the bottom drain plug
before using the unit.
the unit beeps 8 times,