ZyXEL Communications Zy-Air B-420 Quick Installation Manual page 12

The following table describes the fields in this screen.
LABEL
Operating Select Infrastructure from the drop-down list.
Mode
ESSID In this field enter the ESSID of the AP to which you want to associate. To associate to
an ad-hoc network, you must enter the same ESSID as the peer ad-hoc computer.
Enter Any to associate to or roam between any infrastructure wireless networks.
RTS /CTS Enter a value between 0 and 2432. The default is 2432.
Threshold
ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge
Figure 4 Wireless LAN
Table 2 Wireless LAN
DESCRIPTION
12