Bridge - ZyXEL Communications Zy-Air B-420 Quick Installation Manual

LABEL
Choose Set the operating frequency/channel depending on your particular region.
Channel ID
To manually set the ZyAIR to use a channel, select a channel from the drop-down list
box. Click WIRELESS under MAINTENANCE to open the Channel Usage screen to
make sure the channel is not already used by another AP or independent peer-to-
peer wireless network.
To have the ZyAIR automatically select a channel, click Scan instead.
Scan Click this button to have the ZyAIR automatically scan for and select a channel with
the least interference.

Bridge

The ZyAIR can function in bridge mode allowing you to wirelessly connect two wired network segments.
You need to know the MAC address of the peer device, which also must be in bridge mode. The wireless
bridge connection is also known as a Wireless Distribution System (WDS).
Click WIRELESS under SETUP. Select Bridge in the Operating Mode drop-down list box to display the
screen as shown.
ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge
Table 3 Wireless : Ad Hoc
DESCRIPTION
15