Teaching-In Of Max! Components - eQ-3 MAX! Operating Manual

10. Teaching-in of MAX! components

In order to use the MAX! Wall Thermostat + in your installa-
tion, you must teach it in to the MAX! system. You can use
the MAX! Wall Thermostat + both in conjunction with the
MAX! Cube or without using the MAX! Cube. The two pos-
sible usage cases are described in the following sections.
10.1 Teaching in at the MAX! System with the
MAX! Cube
The MAX! Wall Thermostat + is taught in and configured
in combination with the MAX! Cube via the local MAX!
Software. The functions described in chapter 17 are then
available via the local MAX! Software. The configuration
menu of the MAX! Wall Thermostat + („Menu/Mode") but-
ton is deactivated in this case.
In order to teach in at the MAX! Cube, proceed as follows:
• Start the local MAX! Software and click on „New device".
• Perform a long press of the „OK" key on the MAX! Wall
Thermostat + .
• The antenna symbol appears in the display and the MAX!
Wall Thermostat + appears in the MAX! Software.
• In to software, go to „Next" to give the device a name
and assign it to a room.
• The MAX! Wall Thermostat + is now integrated in the
system and can be configured in the software of the re-
spective room.
As soon as the MAX! Wall Thermostat + has been
taught in on a gateway like the MAX! Cube, all data
such as date, time or week programme are transmit-
ted to it via the radio connection.
40