Celluon magic cube User Manual page 14

Adjusting keyboard brightness
■

Press and hold "FN" key and press right arrow key to
increase brightness.

Press and hold "FN" key and press left arrow key to
lower brightness.

There are three levels of brightness. Default
brightness is set at second level during power on.
Note
FN key is not a repeat key. FN key must be clicked once for
each adjustment.
26
Connecting to iPhone and iPad
■
iPhone and iPad connects to Magic Cube® via
Bluetooth HID and a driver is not required.
1) Make sure the Magic Cube® is on a HID mode.
(Sliding button should be pushed to 'up' position).
2) Turn on Magic Cube® by sliding the power button
to the right. A blinking blue LED indicates that the
device is ready to pair.
3) On iPhone/iPad, tap on Settings-General-Bluetooth.
27