Celluon magic cube User Manual page 13

When Blue LED indicates one long, followed by two
quick blinks, the device is searching for previously paired
device within its proximity.
This will last 30 seconds. This feature is added for
convenience, assuming there is a single host device.
Upon successful pairing, Blue LED will stop blinking and
become solid blue.
If Magic Cube® cannot locate previously paired host
device within 30 seconds, it will delete previously stored
connection information and revert to pair mode.

SPP Mode: Blue LED will blink in intervals, indicating
that the device is ready to pair
3.
Upon successful pairing, Blue LED will stop blinking
and become solid blue.
Please refer to the host device manual for pairing
instructions.
4.
After successful pairing of host device and Magic
Cube®, keyboard function is default mode.
24
Changing keyboard mode to mouse mode
■
On the keyboard, press and hold "FN" key and tap
(do not press and hold the button) the mouse cursor
key, located adjacent to space bar. Blinking LED will
indicate successful change of mode.
Changing mouse mode to keyboard mode.
■
Tap only mouse cursor button once (do not press and
hold the key).
Adjusting key stroke sound level
■

Increasing key stroke sound level
Press and hold "FN" key and press up arrow key.

Lowering keystroke sound level
Press and hold "FN" key and press the down arrow
key. There are total 6 levels of sound, including
mute.

Sound level remains as adjusted when device is
turned off and on. Please consider the environment
when adjusting sound level.
25