Table of Contents
Advertisement
•
Installation Steps
Follow these steps to install the network camera on your local network (LAN):
1. Check the package contents against the list below.
2. Connect the Network Camera. See page 5.
3. Set an IP address. See page 6.
4. Set the password. See page 9.
•
Package Component
The system comes with the following components:
Cube Camera
Installation CD
Note: Check your package to make sure that you received the complete system, including all
components shown above.
•
Front View
[XIN-MPC-0110]
Installation Guide
[XIN-MPC-0110W]
3
Stand
Adaptor
Advertisement
Table of Contents
