Table of Contents
Advertisement
MENU
RETURN TO MAIN MENU
SCREEN
8
Press MENU as many times as necessary.
ACCESS FUNCTION SET 1
SCREEN
9
Press CH5 ∞ or TIME SCAN 5 ∞ to place the arrow
next to "FUNCTION SET 1", then press OK.
ACCESS AUX INPUT
SCREEN
10
Press CH5 ∞ or TIME SCAN 5 ∞ to place the arrow
next to "AUX INPUT", then press OK.
SELECT INPUT
11
Press CH5 ∞ or TIME
SCAN 5 ∞ to place the
arrow next to your choice.
a– FRONT S-VHS: To use
the VCR's front S-VHS
and AUDIO IN
connectors.
b– FRONT VIDEO: To use
the VCR's front VIDEO
and AUDIO IN connectors.
c– REAR S-VHS: To use the VCR's rear S-VIDEO (S-
VHS) and AUDIO IN connectors.
d– REAR VIDEO: To use the VCR's rear VIDEO and
AUDIO IN connectors.
8
0
CH
OK
TIME SCAN
AUX INPUT
FRONT S-VHS
FRONT VIDEO
REAR S-VHS
=REAR VIDEO
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
RETURN TO FUNCTION
SET 1 SCREEN
12
Press MENU.
ACCESS TAPE DUB MODE
SCREEN
13
Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow
next to "TAPE DUB MODE", then press OK.
SELECT MODE
14
Place the arrow next to
"ON" by pressing CH 5 ∞
or TIME SCAN 5 ∞.
RETURN TO NORMAL
SCREEN
15
Press MENU as many times as necessary.
START PLAYER
16
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
17
Set your VCR to its record mode.
If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction manual.)
NOTES:
It is not possible to set both "TAPE DUB MODE" and "DYNAMIC
CONTRAST" to ON.
Be sure to set "TAPE DUB MODE" back to "OFF" when you
finish editing.
If you use a cable box or a DBS receiver connected to one of
the VCR's auxiliary input connectors, be sure to select again
the required input at the AUX Input screen when you finish
editing.
53
EN
TAPE DUB MODE
=ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
Advertisement
Table of Contents
