Meridian DSP User Manual page 23

DSP5200 AND
DSP5200HC
Removing the grilles
The grilles are deliberately designed to fi t tightly to avoid vibration during
operation, and they should be removed using the following procedure to
avoid damaging the loudspeaker.
The grille consists of elastic material stretched tightly over a plastic ring.
The plastic ring includes two indentations at the three o'clock and nine
o'clock positions, which you can locate by gently depressing the grille
fabric.
Hold the ring by one of the indentations by depressing the grille fabric
with your thumb, and then wiggle the ring forwards until it comes free of
the speaker. The grille fabric is very resilient and any depressions will soon
disappear.
Note: On no account attempt to remove the grille with a hard object, or
attempt to lever it out from the outside edge, as you will damage the edge
of the speaker surround and the grille itself.
16