Basic Recording - JVC HR-S7800U Instructions Manual

Basic
Recording
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
POWER
POWER
DIGITAL TBC/NR
S-VIDEO
VIDEO (MONO)L—AUDIO—R
S-VHS ET
TV/VCR
1
4
7
1
REW ( 1 )
4
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
1
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before
inserting the cassette.
SHUTTLE ring
PLAY ( 3 )
4
REW
MENU
SP EP
CH
VCR REC
OK
1
2
STOP/EJECT
( 7 / 0 )
PAUSE ( 8 )
POWER
2 3
2
2
5 6
b
–
8 9
0
4
2
–
3
FF ( ¡ )
PAUSE ( 8 )
STOP ( 7 )
2
Select recording channel
On the front panel:
Press CH5∞.
On the Remote:
a– Press CH + or –.
b– Press the Number keys.
If you connect the TV and the VCR only using
the RF connection, press TV/VCR on the Remote
so that the VCR mode indicator lights on the front
display panel, to view the program to be recorded.
3
Set tape speed
Press SP/EP to set the recording speed.
FF
4
Start recording
PLAY
On the front panel:
STOP/EJECT PAUSE Press REC ( ¶ ).
On the Remote:
While holding REC ( ¶ ), press PLAY ( 3 ).
If "VIDEO CALIBRATION" is set to "ON"
(default setting:
tape condition for about seven seconds, then
starts recording. This means that the first seven
seconds of the program will not be recorded. If
this is inconvenient for you, follow the steps
below:
1 Press REC ( ¶ ) and PAUSE ( 8 ) to start
2 Then press PLAY ( 3 ) to start recording
To pause recording
Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ).
To stop recording
a
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 )
on the front panel.
To rewind the tape (when it is not running)
Press REW ( 1 ) (or turn the SHUTTLE ring on the front
panel to the left).
To fast-forward the tape (when it is not running)
Press FF ( ¡ ) (or turn the SHUTTLE ring on the front
panel to the right).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the
tape is not running.
You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press POWER.
It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
or
pg. 39), this VCR checks the
Video Calibration.
after Video Calibration is complete.
25
EN