Basic Recording Features; Changing Display Information; Specifying Recording Length; Instant Timer Recording (Itr) - JVC HR-S7800U Instructions Manual

26
EN
Basic
Recording
Features
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
POWER
DIGITAL TBC/NR
S-VIDEO VIDEO (MONO)L—AUDIO—R
S-VHS ET
E
1
–
C
1
–
1
4
7
C. RESET
1
E
2
–
Accidental erasure prevention
To prevent accidental
recording on a recorded
cassette, remove its record
safety tab.
To record on it later, cover
the hole with adhesive tape.
STOP/EJECT
( 7 / 0 )
REW
MENU
SP EP CH
REC
VCR
OK
B
A
2 3
2
5 6
8 9
0
4
STOP ( 7 )
D
Record safety tab
BASIC PLAYBACK AND RECORDING (cont.)

Changing display information

A
Press DISPLAY during recording or recording pause.
Each time you press the button, the front display panel
shows the time counter, tape remaining time, channel
number, and the clock time in sequence.
Time Counter
Clock Time
To display the VCR status including the time counter
and the clock time on the TV screen, see "Showing on-
screen display" (
"COUNT" appears on the screen when the time
counter is shown. "REMAIN" appears on the screen
when the tape remaining time is shown.
The approximate tape remaining time appears and the
FF
" " indicator lights on the front display panel.
PLAY
The tape remaining time is calculated based on the
tape speed (SP or EP) being used. The indicated
STOP/EJECT PAUSE
remaining time is only an estimate.
To reset the time counter, press C. RESET on the
E
2
– Remote. The counter reading becomes "0:00:00". It is
also reset when a tape is inserted.

Specifying recording length

B

— Instant Timer Recording (ITR)

You can easily specify the recording length from 30
minutes to 6 hours and the VCR shuts off after recording
is finished.
During recording, press REC ( ¶ ) on the front panel
repeatedly until the recording length you want appears
on the front display panel.
The (record) indicator starts flashing.
Each time you press the button, recording length
increases in 30-minute intervals (up to 6 hours).
To cancel an ITR, press STOP ( 7 ) on the Remote or
STOP/EJECT ( 7 / 0 ) on the front panel.
Watching one program while
C
recording another
1
Engage TV mode
During recording...
If you connect the TV and the VCR only using
the RF connection (
from the VCR, press TV/VCR on the Remote so
that VCR mode indicator goes off from the front
display panel. (The TV broadcast being recorded
disappears.)
If you are using the AV connection (
view pictures from the VCR, change the TV's
input mode from AV to TV.
2
Select channel for viewing
Select the channel you want to watch, on the TV.
Tape Remaining Time
Channel No.
pg. 27).
pg. 7) to view pictures
pg. 7) to