Editing; Preparation For Editing - JVC HR-S7600AM Instructions Manual

38
EN
Preparation
For Editing
Turn on the TV and select the VIDEO channel (or AV mode).
1
4
7
1
MENU
2 3
2
5 6
8 9
0
4
OK
PUSH JOG
Picture Control
This feature helps you to adjust the playback picture quality
according to your preference. * The default setting is "AUTO."
ACCESS MAIN NENU SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Press PUSH JOG %fi to place the pointer next to
"FUNCTION SET", then press OK or PUSH JOG
SELECT PICTURE CONTROL
SET MODE
3
Press PUSH JOG %fi to place the pointer next to
"PICTURE CONTROL", then press OK or PUSH JOG
to select the desired mode.
AUTO*: Normally select
"AUTO."
It automatically
adjusts the
picture quality.
* When the
B.E.S.T. function
is set to "OFF"
( pg. 26), you
can only select "NORM" instead of "AUTO."
EDIT: Select when you dub tapes.
SOFT: Select when you want to soften the picture.
SHARP: Select when you want to sharpen the picture.
NOTES:
When you select "EDIT", "SHARP" or "SOFT", the
selected mode will not change until you select again.
When you select "EDIT" to dub tapes, be sure to
select "AUTO" (or "NORM" when the B.E.S.T. function
is set to "OFF") after you finish dubbing the tapes.
RETURN TO NORMAL SCREEN
4
Press MENU.
NOTE:
Select EDIT when you are dubbing tapes. Refer to pages 39 –
41.
Advantages Of S-VHS
Video Recorders
You can edit from VHS to S-VHS, from S-VHS to VHS, or,
from S-VHS to S-VHS.
From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to S-VHS: All signals will be transferred
without degradation.

EDITING

.
FUNCTION SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
AUTO SP=LP TIMER OFF
NEXT PAGE
[5/ ∞ ] =
[MENU] : EXIT