Using The System For The First Time - Quick Setup; Set Up Your System - Abbott FreeStyle Aviator User Manual

Section 1: Getting Acquainted
1.4 Install Pump Battery
Steps Do This
7. Check your work.
Caution:
•
All the signals below must be presented. If any signals below do
reinsert the battery again or try inserting another fresh battery.
•
If the problem happens again, do
insulin delivery method and call your healthcare professional or Customer
Care.
a.
Notice the
b.
Listen for one long beep and four quick beeps.
c. Feel two short vibrations.
d. Look for the next screen.
If you are
Setting up the pump
for the first time
Replacing the battery
within 15 minutes
after the pump
has already been
initialized
DOC15736_Rev-A-Man.indd 15-16
NOT occur,
NOT use the pump. Switch to an alternate
Power up screen will appear.
Then do this
You will see the Set Date/Time screen.
Go to Section 2.2 to Set Up Your System.
1. You will see the TIME/DATE screen.
2. Notice Next is highlighted.
Enter button to return to Home screen.
3. Press
4. Reconnect cannula to cannula housing and
then RESTART your basal delivery from your
companion.
15
2 Using the System for the First Time – Quick Setup

2.1 Set Up Your System

Purpose
To program basic information into your Aviator Pump including time and date, insulin profile,
and inactivity alarm, using your Aviator Companion.
When
Do this procedure:
•
After you have charged the companion's battery, and installed the pump's battery.
•
Before you use your companion and pump as a system for the first time.
Materials
•
Your companion fully charged and powered on.
•
Your pump with battery installed.
•
Your companion and pump already paired. This means that your pump is associated with
your companion and your pump and companion can only communicate with each other.
•
Information from your healthcare professional about the type of insulin you will use with
your pump and other setting information that you will need as recorded in your Table of
Settings in Section 12 – Appendix A.
Helpful Information
•
You will perform this task using your companion, and the settings will automatically be set up on your pump as
well.
•
Before entering your settings, be sure to ask your healthcare professional which type of insulin you will be using
and what is the length of its action time. Record your personalized settings in the Table of Settings in Section 12
– Appendix A.
•
When you have more experience with pumping, you can set up your companion with more optional settings in
Section 6.
•
If you are interrupted while doing this setup, the pump will beep to let you know it is waiting for you to finish
these steps.
•
For a detailed list of the screen settings and the order in which they appear, refer to the
Menus in Section 12 – Appendix G.
Section 2: Using the System for the First Time – Quick Setup
2.1 Set Up Your System
Freestyle Aviator
16
2/9/09 11:29:34 AM