Table Of Contents; Introduction; Installation; Installing The Fireplace Shell - Horizon Fitness 24VF Installation Operation & Maintenance

Vent free, adjustable from 14,000 btu/h to 18,000 btu/h
Table of Contents

Advertisement

24VF Gas Fireplace

Table Of Contents

Introduction .............................................................................. 2
Installing the Fireplace Shell .......................................... 2
Vent Free Installation ..................................................... 3
Installing the Gasline ...................................................... 4
Construction around the fireplace
Facing ................................................................ 5
Mantels and Surrounds ..................................... 5
Installing the Logset ....................................................... 6
Safety Considerations ............................................................. 7
Operation .................................................................................. 8
Maintenance ........................................................................9-10
Troubleshooting Guide ......................................................... 11
Warranty ................................................................................. 12

Introduction

Thank You for choosing a Montigo C-Series Fireplace.
About the 24VF Fireplace:
The 24VF includes an adjustible burner from 18,000 BTU/H to 14,000
BTU/H and a 2 piece ceramic fibre logset. The 24VF is rated for
Propane with a maximum input of 18,000 BTU/H and a minimum
input of 14,000 BTU/H.
Important Warranty and Installation Information:
The Montigo warranty will be voided by, and Montigo disclaims any
responsibility for, the following actions:
Modification of the fireplace and/or components including the
firebox door.
Use of any component part not manufactured or approved by
Montigo in combination with this Montigo fireplace system.
Installation other than as instructed in this manual.
Consult your local Gas Inspection Branch on installation requirements
for factory-built gas fireplaces. Installation & repairs should be done
by a qualified contractor.
Page 

Installation

CAUTIONS
Due to its high operating temperatures, the appliance
should be located out of traffic & away from furniture and
draperies.
Children and adults should be alerted to the hazards of
the high surface temperature, which could cause burns
or clothing ignition.
Young children should be carefully supervised when they
are in the same room as the appliance.
Clothing or other flammable materials should not be
placed on or near the appliance.
Any safety screen or guard removed for servicing an ap-
pliance must be replaced prior to operating the heater.
Installation and repair should be done by a qualified service
person. The appliance should be inspected before use
and at least annually by a professional service person.
More frequent cleaning may be required due to excessive
lint from carpeting, bedding material, etc. It is imperative
that control compartments, burners and air-circulating
Choosing a Location
The fireplace may be installed in a location that maintains proper
clearances to air conditioning ducts, electrical wiring and plumbing.
Safety, as well as efficiency of operation, must be considered when
selecting the fireplace location. Try to select a location that does not
interfere with room traffic and has adequate ventilation. This fire-
place cannot be installed in a high rise flat, in a bedroom or in a
bathroom.
Top Veiw
Front View
Figure 1.
Fireplace dimensions.
Horizon
Side View
Part No. XG0138

Advertisement

Table of Contents
loading

Table of Contents