Teracue ENC-300-HDSDI User Manual
  1. Manuals
  2. Brands
  3. Teracue Manuals
  4. Media Converter
  5. ENC-300-HDSDI
  6. User manual

Teracue ENC-300-HDSDI User Manual

H.264 hd encoder
Hide thumbs
Table of Contents

Advertisement

Quick Links

ENC-300-HDSDI™ H.264 HD Encoder
User Guide V1.5
E
N
C
-
E
N
C
Teracue AG
Schlossstr. 18
85235 Odelzhausen
Germany
Tel:
+49 (0)8134-555-10
Fax:
+49 (0)8134-555-199
info@teracue.com
www.teracue.com
Document Version 1.5/130430
™
™
3
0
0
-
H
D
S
D
I
-
3
0
0
-
H
D
S
D
I
User Guide V1.5
H
.
2
6
4
H
D
E
H
.
2
6
4
H
D
E
N
C
N
C
O
D
E
R
O
D
E
R
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ENC-300-HDSDI and is the answer not in the manual?

Questions and answers

Related Manuals for Teracue ENC-300-HDSDI

Summary of Contents for Teracue ENC-300-HDSDI

  • Page 1 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 ™ ™ User Guide V1.5 Teracue AG Schlossstr. 18 85235 Odelzhausen Germany Tel: +49 (0)8134-555-10 Fax: +49 (0)8134-555-199 info@teracue.com www.teracue.com Document Version 1.5/130430...
  • Page 2 Thank you! Mail to: documentation@teracue.com All information within this document is confidential to Teracue costumers and should not be copied or distributed to non Teracue customers. ENC-300-HDSDI™ and all of its components are registered trademarks RADEMARKS licensed to Teracue.
  • Page 3 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Information about the manual This document is designed to help users setup, configure and work with the H.264 HD encoder. If you received this publication as a PDF, then it's a good idea to print it out for future reference.
  • Page 4 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Release Notes Following are the Features listed which are supported from the firmware versions: – Version 0.9.102jlo7 2011-02-18 16:54  Unicast and Multicast streaming is supported  Transmission of H.264 SD/HD (MPEG-4 part 10) streams is possible ...
  • Page 5 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 – Version 2.03_w34 2012-01-26 12:42  Reduce arm load to be able to stream with up to 14Mbps.  Implementation of AES and VES streaming at the stream mode  PCR PID set to Video PID ...
  • Page 6 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 – Version 2.06_w40 2012-09-03 13:16  This Version is a Beta-Release (after the update, please delete your browser cache)  Support of multiple UDP destinations  Support of TCP/SERVER streaming with multiple clients ...
  • Page 7 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 – Version 2.11_w56 2013-01-11 18:09  Fix COMPORT passthrough support  EDID menu point added. if you login at the /log page  Info icons added  ENCODER/AUDIO: Talkback Rate 24000, 12000, 8000, 6000 added ...
  • Page 8 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 – Version 2.12_w58 2013-04-02 16:33  ENCODER/VIDEO: Enable downscaling for all resolutions siehe Seite 26  ENCODER/VIDEO: support 'Chroma downfilter' when downscaling. For downscaling and chroma downfiltering frate_divider may need to be set to an appropriate value >...

  • Page 9: Table Of Contents

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 III. Content OVERVIEW ............................ 11 GENERAL INFORMATION ......................12 ....................... 12 NPACKING THE NCODER ENC-300™ blade-based units ................... 12 2.1.1 ENC-300™ chassis-based devices ................... 12 2.1.2 ............13 ETTING UP THE NCODER AND...
  • Page 10 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 FEC F ..................71 ORWARD RROR ORRECTION ................... 73 ESETTING TO ACTORY EFAULT ENC-300™ ....................74 ESTARTING THE CE, FCC CONFORMANCE ......................75 RESTRICTION OF HAZARDOUS SUBSTANCES DIRECTIVE (ROHS) ........75 WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT DIRECTIVE (WEEE) ......76 TECHNICAL SPECIFICATION ......................

  • Page 11: Overview

    -via network- on PC’s, TV’s or other display devices. The ENC-300-HDSDI is a compact, low cost H.264 SD/HD video encoding and LIVE streaming blade. The ENC-300-HDSDI encoder process input streams from CIF up to Full-HD resolution for professional MPEG-4 AVC H.264 SD/HD streaming to any kind of device.

  • Page 12: General Information

    ENC-300-HDSDI™ type (blade-based or chassis-based) do you exactly want. ENC-300-HDSDI™ blade-based units can be used in the FR-610 multi-channel chassis, which can hold up to max. 6 Teracue blades. Inside the FR-610 chassis different types of ENC encoder blades, DEC decoder blades can be ‘mixed and matched’.

  • Page 13: Setting Up The Encoder And Safety Instructions

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Setting up the Encoder and Safety Instructions Always read the instructions carefully and keep this user guide for future reference. Please choose a suitable location for operating the encoder(s). The ENC-300™ should not be exposed to the following: ...

  • Page 14: Connecting The Encoder (Chassis-Based)

    GPIO, RS-232/422, via Sub-D 26 pin interface. USB: USB-interface. Network: Standard 10/100Mbit/s Ethernet via RJ-45 Power in: Power cable with connector for the power supply.. Table 1: Description of the connectors on the ENC-300-HDSDI™ front side CVBS = FBAS = Composite Signal YC = S-Video Signal...

  • Page 15: Assignment Of The Sub-D 26-Pin Connector

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Assignment of the Sub-D 26-pin Connector Table 2 describes the Assignment of the Sub-D 26-pin connector which is on the front side of the ENC-200™. Pin: Sub-D 26-pin Connector Assignment: TxB (RS-232 TxD)

  • Page 16: Breakout Cable 'S

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Breakout Cable ‘S’ For the ENC-300™ it exists three different breakout cables which are called Breakout cable ‘S’, Breakout cable ‘VGA’ and Breakout cable ‘P’. The Breakout cable ‘S’ is the standard breakout cable and Table 3 describes the provided signals.

  • Page 17: Breakout Cable 'P

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Breakout Cable ‘P’ For the ENC-300™ it exists three different breakout cables which are called Breakout cable ‘S’, Breakout cable ‘VGA’ and Breakout cable ‘P’. The Breakout cable ‘P’ is the professional breakout cable and Table 4 describes the provided signals.

  • Page 18: Breakout Cable 'Vga

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Breakout Cable ‘VGA’ For the ENC-300™ it exists three different breakout cables which are called Breakout cable ‘S’, Breakout cable ‘VGA’ and Breakout cable ‘P’. The Breakout cable ‘VGA’ is the VGA breakout cable and Table 5 describes the provided signals.

  • Page 19: Enc-300™ User Guide

    Before proceeding please be sure that the encoder is setup correctly and all necessary connections are established. Working and configuring Teracue's encoders is very easy. You do not need to install an application or remote configuring software. If you know how to browse the internet, then you already know how to access and control the encoders, simply via web-browser.

  • Page 20: Login

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Login After typing the IP-address of your ENC-300™ into the browser and hitting enter, a login screen should appear. See Figure 5. Enter your username and password and click on ‘Login’. Figure 5: ENC-300™ web interface 'Login Page' Default IP-address: 172.16.20.100...

  • Page 21: Graphical User Interface Of The Enc-300

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Graphical User Interface of the ENC-300™ 3.3.1 Navigational Menus After successful login you have access to the encoder's configuration. All of the settings can be adjusted via web-browser. Main Menu: The main menu contains the ‘ENCODER’, ‘NETWORK’, ‘COMPORT’, ‘SYSTEM’, ‘HELP’ and ‘LOGOUT’...

  • Page 22: Apply' And 'Save' Buttons

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 ‘APPLY’ and ‘SAVE’ Buttons 3.3.2 A change or multiple changes of the configuration settings will only take effect after the ‘> APPLY’ button is pressed. The encoder will then start working with the new parameters, but the parameters will not be saved to the encoder.

  • Page 23: Encoder Configuration

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Encoder Configuration 3.4.1 Menu: Encoder / Settings Under the menu option ‘ENCODER/SETTINGS’ you define the main operational state of the encoder. Here you can set encoding process to ‘On’ or ‘Off’. See Figure 8.
  • Page 24 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Transport Stream Padding: Specifies the padding mode. You can choose between:  ON (is recommend when a constant data rate is needed)  OFF (the transport stream has a variable data rate. All settings in the ‘VBV size’...

  • Page 25: Menu: Encoder / Video

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.2 Menu: Encoder / Video Figure 9 shows the ‘Encoder / Video’ page of the ENC-300™ encoder and Table 8 describes it. Figure 9: 'Encoder / Video' page of the ENC-300™ encoder Settings:...
  • Page 26 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 data volume of 10%, it means that for one I-Frame or ten P- Frames the same data volume is needed. The H.264 standard allows long GOPs. The ENC-300™ limits the GOP length to 500 frames.
  • Page 27 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5  720p50/60 to CIF (360x288p50, 360x240p60), ‘Frame Rate Divider’ = ‘2’ for 25/30p  D1 (576i25, 480i30) to CIF (360x288p25, 360x240p30) A conversion from 50 frames to 60 or 30 frames or a conversion from 60 frames to 50 or 25 frames is not possible.

  • Page 28: Menu: Encoder / Audio

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.3 Menu: Encoder / Audio Figure 10 shows the ‘Encoder / Audio’ page of the ENC-300™ encoder. Table 9 describes the ‘Encoder / Audio’ page of the ENC-300™. Figure 10: ‘Encoder / Audio’ page of the ENC-300™ encoder...

  • Page 29: Menu: Encoder / Sap

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.4 Menu: Encoder / SAP The Session Announcement Protocol (SAP) is a protocol for broadcasting multicast session information. A SAP listening application can listen to the well-known SAP multicast address and construct a guide of all advertised multicast sessions. SAP was published by the IETF as RFC 2974.

  • Page 30: Menu: Encoder / Sdt

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.5 Menu: Encoder / SDT The Service Description Table (SDT) describes services that are contained in a particular transport stream. Such services are the service name and the service provider. The ETSI EN 300 468 standard contains a detailed information about SDT.

  • Page 31: Menu: Encoder / Destination

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.6 Menu: Encoder / Destination ENC-300™ is capable to encode a video either as a unicast stream or a multicast stream. According to the entered destination IP-address, the encoder will automatically recognize whether it should be a unicast or multicast stream.
  • Page 32 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 TTL (1-255): Specifies number routers/switches many routers/switches the stream is allowed to travel/pass. If this check-box is enabled, the encoder sends IGMP-2 ‘join- Join Own Multicast: requests’ to routers/switches in order to keep the multicast port open.
  • Page 33 See chapter 4.4. For the lowest overhead (+5%) Teracue recommends using a ‘FEC Rows’ value of ‘20’, a ‘FEC Columns’ value of ‘5’, the ‘1D-FEC’ dimension and ‘Block Aligned’...
  • Page 34 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Figure 14: Unicast connection between ENC-300™ and DEC-200™...

  • Page 35: Menu: Encoder / Gpio

    At the ENC-300-HDSDI, the Sub-D 26-pin connector for the breakout cable has the input and output for GPIO. At the ENC-300-DVI, GPIO is only usable, when you use the FR- 610 chassis.
  • Page 36 The non-operating state of GPI is 1. To change the GPI value to 0, you must set GPI-C to GND and feed the GPI-A with 3.3V. IMPORTANT NOTE: A series resistor of 380 Ω is mandatory at some ENC-300-HDSDI boards. Before you feed an input voltage at the GPI-A input, we recommend strongly checking at chapter 9 on page 79 whether your ENC-300-HDSDI-board needs a series resistor.

  • Page 37: Menu: Encoder / Inserter

    When your bitmap files meet all of the criteria, please send it to Teracue (support@teracue.com). Teracue creates for you the needed logo file (*.ppm) and sends this file back to you. After you have received this special logo file, you can upload your logo file with the ENC-300 web browser via the menu ENCODER >...
  • Page 38 Upload a PPM Image file: Specifies the path of the image file which shall be uploaded. Please browse to the path of your image file (*.ppm, portable pixmap), which you have received from Teracue, and click afterwards the ‘Upload’ button. Upload: Uploads the image file (*.ppm, portable pixmap) which is selected...

  • Page 39: Menu: Encoder / Klv

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.9 Menu: Encoder / KLV The KLV (Key Length Value) page is intended for the insertion of geo data (as meta data) in the transport stream. See Figure 17. Receiving geo data is only supported via UDP protocol. ENC-300 can send the geo data as meta data with all supported transport protocols.

  • Page 40: Menu: Encoder / Xplayer

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.10 Menu: Encoder / XPlayer The menu ‘XPlayer’ starts the ‘Standalone XPlayer’, if an ‘XPlayer’ is installed on the client PC. You can start the ‘XPlayer’ by clicking the XPlayer-Link inside the ‘Encoder’ menu.

  • Page 41: Menu: Network / Settings

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.11 Menu: Network / Settings Figure 19 shows the ‘Network / Settings’ page of the ENC-300™ encoder. Here you are able to set the encoder's own IP-address, subnet mask, gateway address and define the encoder's host name.

  • Page 42: Menu: Network / Snmp (Simple Network Management Protocol)

    (Software not supplied by Teracue). Set your SNMP manager to SNMPv2. Teracue uses the MIB Browser by iReasoning to monitor/set up the ENC-300™. iReasoning offers a free version of the MIB Browser under www.ireasoning.com, which is useful to read the actual status or setting up the ENC-300™.
  • Page 43 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Figure 20: 'Network / SNMP' page of the ENC-300™ encoder Settings: Description: Manager IP: Specifies the IP-address of the Client PC on which the SNMP manager (TRAP Receiver) is installed. This field must be configured, to receive TRAPs.

  • Page 44: Setting Up The Snmp Manager 'Mib Browser

    MIB files, see Figure 21. Figure 21: Load ENC-200™ MIBs You have to load both files: ‘TERACUE-ENC200-MIB.txt’ and ‘TERACUE-SNMP-MIB.txt’. As next, go to the menu on ‘Tools’ and select ‘Options’. It opens the ‘Option’ window in which you choose the ‘Agents’...
  • Page 45 ENC-300™ via SNMP. To control your ENC-300™, please go to the data tree and open the loaded Teracue ENC-300™ MIB which is shown there. The opened sub-tree shows you all the adjustable options, which you also have with the ENC-300™...
  • Page 46 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Figure 24: Control the ENC-300™ via MIB Browser The MIB-Browser shows you also details of your selected data tree item, see Figure 25. This info section is in the left bottom of the MIB-Browser. Figure 25 shows the details of the data tree item ‘videoBitrate’.

  • Page 47: Menu: Comport / Settings

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.13 Menu: Comport / Settings The ‘comport / settings’ webpage defines the parameters for the ENC's integrated comport/serial port. ENC-300™ encoders are always comport servers and DEC-200 decoders are always comport clients. Figure 26: 'Comport / Settings' page of the ENC-300™ encoder...

  • Page 48: Menu: Presets / Load

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.14 Menu: Presets / Load Since firmware version 2.03_w32 the user can store the encoder settings in so-called presets. Via the ‘PRESETS’ webpages of the ENC-300, presets can be created, uploaded, downloaded and deleted.

  • Page 49: Menu: Presets / Save

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.15 Menu: Presets / Save Since firmware version 2.03_w32 the user can store the encoder settings in so-called presets. Via the ‘PRESETS’ webpages of the ENC-300, presets can be created, uploaded, downloaded and deleted.

  • Page 50: Menu: Presets / Manage

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.16 Menu: Presets / Manage Since firmware version 2.03_w32 the user can store the encoder settings in so-called presets. Via the ‘PRESETS’ webpages of the ENC-300, presets can be created, uploaded, downloaded and deleted.

  • Page 51: Menu: System / Settings

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.17 Menu: System / Settings The menu ‘System/Settings’ displays information about the installed firmware version and additionally unlocked features. Furthermore the system uptime, the MAC address and the used link mode is shown in the ‘System/Settings’...

  • Page 52: Menu: System / Date/Time

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.18 Menu: System / Date/Time You can set the time and date for the encoder in the menu ‘System/Date/Time’. See Figure 31. Figure 31: 'System / Date/Time' page of the ENC-300™ encoder Settings:...

  • Page 53: Menu: System / Update (Upgrading Firmware Version)

    3.4.19 Menu: System / Update (Upgrading firmware version) Teracue's goal is customer satisfaction and constant product improvement. Please check regularly to see if the most recent firmware version is installed on your ENC-300™. Please visit the IPTV Support area on: www.teracue.com.

  • Page 54: Menu: System / Password

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.20 Menu: System / Password Figure 33 shows the ‘System / Password’ page of the ENC-300™ encoder. If you do need to change the password due to security issues, then simply click on the submenu ‘PASSWORD’...

  • Page 55: Menu: System / Remote

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 3.4.21 Menu: System / Remote Figure 34 shows the ‘System / Remote’ page of the ENC-300™ encoder. Enables / Disables the port 2323 for remote controlling. If you want use the remote control function, you must enable the ‘Remote Configuration’...

  • Page 56: Help

    User Guide V1.5 Help Clicking on the ‘HELP’ button will open the Teracue website where you can get to the ‘Support’ link. This will only work if the encoder is situated in a network in which internet access is provided. Otherwise ‘page not found’ may be displayed.

  • Page 57: Logout

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Logout After having made adjustments to the encoder, please be sure to logout, see Figure 35. Figure 35: Logout form the ENC-300™ Logging out prevents misuse and unauthorized access to the ENC-300™.

  • Page 58: Extended Function

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Extended Function Remote Control This chapter describes the remote control of the ENC-300™ for media controls like Crestron or AMX. To control the ENC-300™, the telnet protocol is used at the port number 2323. Furthermore here is no login necessary.
  • Page 59 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 For starting a telnet session type: telnet <ip-address> <2323>, e.g. ‘telnet 172.16.20.100 2323’, and press the Enter button. See Figure 38. The value ‘2323’ specifies the used TCP/IP port number for the telnet session of the remote control test.
  • Page 60 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 ╠► configuration/ ║ ╠═══════► encoder/ ║ ║ ╚════► 0/ ║ ║ ╠═════════► page_refresh Page Refresh (yes/no) ║ ║ ╠═════════► start Encoder Start (yes/no) ║ ║ ╠═════════► stream_mode Stream Mode (TS, TS/VIDEO, VES) ║ ║...
  • Page 61 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 ║ ║ ║ ╚═══════► system/ ║ ╠════► date Date; MM/DD/YYYY ║ ╚════► time Time; HH:MM; 24hours ║ ╚► status/ ╠═══════► system/ ║ ╠════► board_version ENC-300 Hardware Version ║ ╠════► software_version ║ ╠════► uptime System uptime ║...

  • Page 62: Audio Talkback

    Furthermore the ENC-300-HDSDI supports the talkback function in the portable chassis and in the FR-610 chassis. The ENC-300-DVI supports the talkback function only in the FR-610 chassis. In order to talkback from the DEC-300™ to the ENC-300™, please be sure that you have a microphone or another audio signal connected to the ‘Audio In’...
  • Page 63 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 For a talkback session you must configure the DEC-300™ decoder and the ENC-300™ encoder. To start the talkback session you must configure the DEC-300™ webpage. Please open the DEC- 300™ webpage, select in the main menu ‘DECODER’ and click in the submenu ‘AUDIO’.

  • Page 64: Talkback Session Between Enc-300™ And Dec-200

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Talkback Session between ENC-300™ and DEC-200™ 4.2.2 To use the talkback function on the ENC-300™ in connection with the DEC-200™, please be sure that your encoder has the firmware version 2.04_w38 or higher, because this firmware is necessary.
  • Page 65 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Now, the DEC-200™ and your desired ENC-300™ is completely configured and you can talkback to your desired ENC-300™. To stop the talkback session, please enter ‘0.0.0.0’ in the ‘Talkback IP’ field of the DEC-200™.

  • Page 66: Tcp Streaming

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 TCP Streaming If in your network occurs packet loss, jitter etc., we recommend using the connection-oriented protocol TCP. TCP provides a point-to-point connection (unicast) for applications that require reliable communications. If the TCP connection is established, then the data will be streamed in the same order as it was sent from the encoder.

  • Page 67: Tcp Configuration: Dec-200™ Is The Client

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 TCP configuration: DEC-200™ is the Client 4.3.1 Follow the steps below, to create a TCP connection at which the DEC-200™ is the client:  Please open the ENC-300™ webpage, go to the ENCODER > DESTINATION webpage and select in the ‘Transport Protocol’...

  • Page 68: Tcp Configuration: Dec-300™ Is The Client

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 TCP configuration: DEC-300™ is the Client 4.3.2 Follow the steps below, to create a TCP connection at which the DEC-300™ is the client:  Please open the ENC-300™ webpage, go to the ENCODER > DESTINATION webpage and select in the ‘Transport Protocol’...

  • Page 69: Tcp Configuration: Dec-200™ Is The Server

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 TCP configuration: DEC-200™ is the Server 4.3.3 Please make the following steps, to create a TCP connection at which the DEC-300™ is the server:  Please open the ENC-300™ webpage, go to the ENCODER > DESTINATION webpage and select in the ‘Transport Protocol’...

  • Page 70: Tcp Configuration: Dec-300™ Is The Server

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 TCP configuration: DEC-300™ is the Server 4.3.4 Please make the following steps, to create a TCP connection at which the DEC-300™ is the server:  Please open the ENC-300™ webpage, go to the ENCODER > DESTINATION webpage and select in the ‘Transport Protocol’...

  • Page 71: Fec Forward Error Correction

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 FEC Forward Error Correction The FEC feature is an additionally option which must be purchased separately. The ‘SYSTEM / SETTINGS’ webpage shows whether your encoder has the FEC permission, see chapter 3.4.17 on page 51.
  • Page 72 ‘RTP/FEC’ as transport protocol, the used ‘FEC Dimension’ and the source IP-address with port must be set on the DEC-300. For the lowest overhead (+5%) Teracue recommends using on the ENC-300 a ‘FEC Rows’ value of ‘20’, a ‘FEC Columns’ value of ‘5’, the ‘1D-FEC’ dimension and ‘Block...

  • Page 73: Resetting To Factory Default

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Resetting to Factory Default The ENC-300™ (blade based and chassis based) can easily be returned to its factory default values. In order to do these please power down the encoder chassis. If you operate your ENC-300™ in a FR-610 please remove the blade gently and carefully from the chassis.

  • Page 74: Restarting The Enc-300

    ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 Restarting the ENC-300™ If an ENC-300™ is not approachable anymore, you can restart the ENC-300™ by using the restart switch. The restart button is placed in a hole on the front panel and it is located into the ‘O’ of the lettering ‘NETWORK’, see Figure 46.

  • Page 75: Ce, Fcc Conformance

    After July 1, 2006 the use of these materials will be banned in new products sold in Europe. Since beginning of 2005, Teracue AG began the process of redesigning and converting all of its products to not contain any of the listed materials. All new products sold by Teracue will be fully RoHS-compliant by July 1, 2006.

  • Page 76: Waste Electrical And Electronic Equipment Directive (Weee)

    WEEE and saving the environment by separating out WEEE and disposing of it properly. Teracue AG is a registered WEEE participant since 2004. Within Germany, Teracue is registered under the WEEE Number: DE10642708. German customers and end-users are required to discard products marked with the WEEE symbol (crossed out trash bin) at local resource collection points.

  • Page 77: Technical Specification

    User Guide V1.5 Technical Specification ENC-300-HDSDI™: ENC-300-HDSDI™: The ENC-300-HDSDI is a MPEG-4 AVC H.264 SD/HD encoder blade with SD/HD SDI input (with embedded audio) and Composite, S-Video (YC), Component (YP ) or analogue VGA (RGB) input. The ENC-300-HDSDI is delivered with the BREAK-OUT cable ‘S’ as standard additional inputs/outputs via the DB26 connector.
  • Page 78 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 I/O Specifications: Network: 10/100TX Ethernet, RJ45, half/full duplex, Auto-sensing or manual control Streaming traffic: Unicast and Multicast traffic supported IP Protocols: HTTP, TCP/IP Control Protocol, TCP/IP and UDP/IP Streaming, RTP, RTCP*, SRTP*, IGMPv3, SAPv2, Unicast/Multicast, SNMPv2, DHCP...

  • Page 79: Known Issues

    At Version 0.9.105_w07 the TTL has a fix value of 32  A range of ENC-300-HDSDI™ boards have no series resistor at the GPI-A Input. The listed serial numbers below specify the ENC-300-HDSDI™ boards, which have no series resistor at the GPI-A Input.
  • Page 80 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 IV. List of figures 1: ENC-300-HDSDI™ ..................... 14 IGURE FRONT SIDE 2: B 'S' ....................... 16 IGURE REAKOUT CABLE 3: B 'P' ....................... 17 IGURE REAKOUT CABLE 4: B 'VGA' ......................18 IGURE REAKOUT CABLE 5: ENC-300™...
  • Page 81 ENC-300-HDSDI™ H.264 HD Encoder User Guide V1.5 List of tables 1: D ENC-300-HDSDI™ ......14 ABLE ESCRIPTION OF THE CONNECTORS ON THE FRONT SIDE 2: A -D 26- ................ 15 ABLE SSIGNMENT OF THE ONNECTOR 3: B 'S' ......................... 16...

Table of Contents