Promate RevoBlue User Manual page 6

• When the headset is connected to your device and is ready for use, the
blue indicator light will start flashing every 2 seconds.
• You may need to set the headset as the Bluetooth audio output from
certain software.
c) Pairing with MAC System
• Open the Bluetooth headset and stay in the search state.
• Go to System Preferences and choose Bluetooth.
• In the menu, you could see the "+". Press the "+" to add the Bluetooth device.
• Then double press the "RevoBlue" in the menu to pair.
• After paired successfully, then set the Audio as Stereo audio output or
Bluetooth audio output. After this setting, then you may use the Bluetooth
headset successfully.
7. Operation
a) Receiving a call
• Short-press the Power/Pair/Talk key to receive an incoming call.
• Ending a call.
• Short-press the Power/Pair/Talk key to end a call.
b) Making a call
• Dial at your mobile phone and the call will be transferred to your headset
automatically, depending on the phone setup
c) Voice call activation*.
• If your phone supports this feature with the headset, when there is no call
in progress press and hold the multifunction key for about 2 seconds.
Proceed as described in the phone user guide.
4