Promate RevoBlue User Manual page 5

6. Pairing the Headset with an External Device
a) Pairing with a mobile phone
• If your phone supports the A2DP Bluetooth profile and has a music player
feature, you can use the phone to make and receive calls, and to play music
with the RevoBlue headset.
• Ensure that your phone or music device is on and the headset is turned off.
• Press and hold the Power/Pair/Talk key for about 5 seconds until the Blue
indicator light flashes quickly.
• Activate the Bluetooth feature on your phone or music player, and set it to
search for Bluetooth devices.
• Select the headset RevoBlue from the list of found devices on your phone or
music player.
• Enter the pass code 0000 to pair and connect the headset to your device.
If your device does not have a keypad, it may use this pass code by default.
• When the headset is connected to your device and is ready for use, the Blue
indicator light will start flashing every 2 seconds.
b) Pairing with a Windows System
• Firstly, make sure that the Bluetooth on the PC is compatible with A2DP and
Headset Profile.
• Ensure that your laptop or desktop has a built-in Bluetooth on it is turned on.
• Press and hold the Power/Pair/Talk key of the RevoBlue for about 5 seconds
until the Blue indicator light starts to flash quickly.
• Locate the Bluetooth software on the Windows system and set it to search
for Bluetooth devices.
• Select the headset RevoBlue from the list of found devices.
• Enter the pass code 0000 to pair and connect the headset to your device if it
asked for a passkey.
3