Tests Not Required For Glove Qualifi Cation - Garmin GTN 725 Cockpit Reference Manual

Touch the COM standby frequency to activate the
com frequency entry keypad (Task applicable to
635/650/750 only).
Enter a valid com frequency and touch the Enter key
(635/650/750 only).
Touch the active com frequency to fl ip/fl op the com
frequencies. (635/650/750 only).
Touch the active nav frequency to fl ip/fl op the nav
frequencies (750 only).
Touch the Menu key (650 only).
Tests Not Required for Glove Qualifi cation
Navigate to the fl ight plan page.
While viewing the fl ight plan page, touch the list and
drag up/down to view the fl ight plan waypoints.
While viewing the fl ight plan page, touch and fl ick the
list to view the fl ight plan waypoints.
Navigate to the map page.
Touch the Map to enter Pan mode, then touch the
Graphically Edit FPL key.
Remove KONP from the fl ight plan graphically by
touching KONP and dragging it to an area without
any waypoints (Pan and zoom in/out as necessary to
accomplish the task).
Insert KSPB between KMMV and BTG by dragging the
leg between KMMV and BTG to KSPB.
76
Task Task
Task Task
GTN 725/750 Cockpit Reference Guide (CRG)
Operation With Glove Operation With Glove
(circle one) (circle one)
Same Worse
Same Worse
Same Worse
Same Worse
Same Worse
Operation With Glove Operation With Glove
(circle one) (circle one)
NA
Same Worse
Same Worse
NA
Same Worse
Same Worse
Same Worse
190-01007-04 Rev. C