Cisco Linksys WET610N Quick Installation Manual page 20

Wireless-n ethernet bridge with dual-band
Hide thumbs Also See for Linksys WET610N:
Table of Contents

Advertisement

Chapter 3
Wireless > Wireless Network Site Survey
Wireless Network Site Survey
Number of Wireless Networks
networks detected by the Bridge is displayed.
Select
To connect to a wireless network, click Select.
Then click Connect.
Wireless Network Name
The network name or SSID of
the wireless network is displayed.
GHz
The radio band of the wireless network is displayed.
Signal
The percentage of signal strength is displayed.
100% is the strongest signal strength possible; 0% is the
weakest possible.
Security
If the network supports Wi-Fi Protected Setup,
the Wi-Fi Protected Setup icon
method used by the wireless network is displayed.
Click Refresh to update the on-screen information.
After you have selected a network, click Connect. A new
screen appears. Follow the instructions for the security
method of your network.
WPA
Wireless Network Site Survey > Wireless Security (WPA)
Network Name (SSID)
The name of the network you
selected is automatically displayed.
Security Mode
WPA Personal is automatically displayed.
Wireless-N Ethernet Bridge with Dual-Band
The number of wireless
is displayed. The security
Advanced Configuration
Encryption
WPA supports the TKIP encryption method,
with dynamic encryption keys.
Passphrase
Enter the key shared by the Bridge and
wireless router or access point. It must have 8-63
characters.
Click Refresh to update the on-screen information.
After you have entered the security settings, click
Connect.
WPA2
Wireless Network Site Survey > Wireless Security (WPA2)
Network Name (SSID)
The name of the network you
selected is automatically displayed.
Security
Mode
WPA2
displayed.
Encryption
WPA2 supports two encryption methods,
TKIP and AES, with dynamic encryption keys. Select the
encryption method, AES or TKIP or AES.
Passphrase
Enter the key shared by the Bridge and
wireless router or access point. It must have 8-63
characters.
Click Refresh to update the on-screen information.
After you have entered the security settings, click
Connect.
WEP
Wireless Network Site Survey > Wireless Security (WEP)
Network Name (SSID)
The name of the network you
selected is automatically displayed.
Personal
is
automatically
6

Advertisement

Table of Contents
loading

Table of Contents