Front And Rear Panel - StarTech.com HD 240 User Manual

Front and Rear Panel

1. Front panel
Push
1 POWER BUTTON:
: Used to change cha nnels without usin
CHANNEL DOWN
2
: Used to change channels without using the Remote Control
CHANNEL
3 UP
REMOTE CONTROL SENSOR: Used to receive the signal from the Remote Control.
4
STANDBY INDICATOR: Used to
5
the LED will turn red when the Set Top Box is in
2. Rear panel
This socket connects to your external Aerial.
1 RF IN:
RF LOOP THROUGH: This socket will
2
another video system.
COAXIAL: This socket connects to
3
: This socket connect to your TV
4
TV
VCR Thi s sockets connect to y ou
5 :
High definition audio and video output used to connect to a HDMI device
6
HDMI:
USB: This port connect to your Hard disk or other menory disk
7
8 : This is used to connect to your main power supply.
AC IN
StarTech HD 240 AVC/H.264 MPEG-4 HDMI
5
to turn on/off the main power supply.
indicate the power state of the Set Top Box,
standby mode.
feed the RF signal to either your TV or
the Coaxial input
r DVD or other STB.
1
the Remote Control. g
on your surround sound system.
8
.