Bluetooth audio receiver with nfc - wireless audio (3 pages)
Summary of Contents for StarTech.com ST12MHDLANRX
Page 1
DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.com Manual Revision: 03/15/2013...
Page 2
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
Introduction Packaging Contents • 1x ST12MHDLANRX HDMI® Receiver • 1x Mounting Bracket Kit • 1x Foot Pad Set • 1x Power Adapter • 1x Instruction Manual System Requirements • 1 x HDMI® over IP Transmitter Unit • 1 x HDMI® over IP Receiver Unit •...
ST12MHDLANRX Receiver Unit Front Rear 1. Power Jack 1. F2 (Used during EDID Copy procedure) 2. Network Status LED 2. F1 (Used during factory 3. Reset Button default setting) 4. LAN Port (RJ-45) 3. Dip Rotary Switch (Used to 5. Video Out pair Transmitter to Receiver) 6.
Connect an HDMI® cable from the display Input to the “Video Out” port on the Receiver Unit. c) Connect the provided Receiver Unit power supply. d) (Optional) If using additional ST12MHDLANRX Receivers (sold separately), repeat steps for each additional Receiver. NOTE: The “Dip Rotary Switch” on the Extender and each Receiver connected to the network must be set in the same position for the devices to communicate.
EDID Copy EDID allows the video source to output the most ideal signal to the video display. The “EDID Copy” function on the ST12MHDLANRX ensures that EDID is still active through the Ethernet extender. NOTE: If you using multiple receivers the EDID can only be copied from one unit, the signal customized for that display will be applied to all displays connected through additional receivers.
Factory Default Setting 1. Disconnect the power cable from the Transmitter/Receiver. 2. Hold down the F1 button 3. Reconnect the Power while holding down the F1 button 4. Release F1 button after the power has been reconnected for 17 seconds (the Link OK POWER LED flashes green and blue) 5.
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 10
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the ST12MHDLANRX and is the answer not in the manual?
Questions and answers