Playback Features; Selecting Monitor Sound - Audio Monitor; Repeat Play - JVC HR-J693U Instructions Manual

– Playback –
Reverse
Reverse
Reverse
Reverse slow
search
motion
play
2 steps
2 steps
When the tape is not running
Rewind/fast-forward
Press REW ( ) or FF (
3 5
Eject the tape
Press STOP/EJECT ( ).
0
You can also eject the cassette when the VCR is turned off.
Turn off the VCR
Press POWER (1).

Playback Features

Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Adjusting tracking condition
— Tracking Adjustment
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic tracking
starts working and continuously analyzes the signal to enable
optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, follow the procedures below.
On the Remote
A
Press SP/EP to activate manual tracking.
B
Press CH / to eliminate the noises. Press it briefly for a fine
r t
adjustment, or press and hold for a coarse adjustment.
Press SP/EP again to reactivate automatic tracking.
Forward
Slow Forward
Normal
motion search
play
2 steps 3 steps
).
Selecting monitor sound
— Audio Monitor
While playing back a tape on which stereo sound or SAP sound is
recorded, press A. MONITOR on the Remote. Each time you press
the button, sound changes.
HI-FI: Normally select this. Hi-Fi sound is played back.
HI-FI L: Sound on the left Hi-Fi channel is played back.
HI-FI R: Sound on the right Hi-Fi channel is played back.
NORM: Sound on the normal track is played back.
NORM HI-FI: Both sounds on the Hi-Fi track and normal track are
mixed and played back.
NOTE:
The above indication appears when "SUPERIMPOSE" is set to
"ON" ( pg. 14), though the monitor sound changes in
sequence.
Automatic operations after rewinding
— Next Function Memory
The Next Function Memory "tells" the VCR what to do after
rewinding is complete. Ensure that the VCR is in stop mode.
For Automatic Playback Start
Press REW ( ), then press PLAY (
3
For Automatic Power Off
Press REW ( ), then press POWER within 2 seconds.
3
For Automatic Timer Standby
Press REW ( ), then press TIMER within 2 seconds.
3
NOTE:
It is not possible to select the Automatic Timer Standby function if
the cassette's record safety tab is removed.
Playing back tape repeatedly (100 times)

— Repeat Play

During playback, press and hold PLAY (
5 seconds. The play indicator (
blinking slowly. To stop playback, press STOP (
or STOP/EJECT (
0
— 10 —
) within 2 seconds.
4
) for more than
4
) on the display panel starts
$
) on the Remote
8
) on the VCR.
CONTINUED ON NEXT PAGE