Chapter 4. Remote Software; Using Remote Software; Starting The Software - ROHS Performance Series User Manual

Chapter 4. NEMON Remote Software
1. Using NEMON Remote Software
Note
: Before using the remote software, refer to the customer card in the package to
download the software. Please install the software on your PC once you download it.

1-1. Starting the Software

Double click on the program icon on PC to run the NEMON remote software.
Main screen of the NEMON remote software appears as shown below.
Note
: A minimum resolution should be at least 1024 x 620; and it is recommended to use the
software at 1280 x 1024 or higher.
Unfold Site List
Connect
Disconnect
Live Playback
The Log In window will appear when the NEMON remote software starts. Select user as each
user and user group has different access authority over the system control based on how it is
configured. Enter OK once the user level is selected. The default password for any user is blank.
Live: Click the icon to enter the live mode.
Playback: Click the icon to enter the playback mode.
Connect / Disconnect: Click the button to connect a site for the live or playback mode selected.
Playback Control Display Mode
Change Display Page
Setup
Audio Volume
Close
Full Screen
Unfold Tool Panel
Voice Transmission
Screenshot
Sequence
Calendar Search
Event Search
Text-In Search
55