Dvr Configuration; System; Menu > System > Information - ROHS Performance Series User Manual

2. DVR Configuration

2-1. SYSTEM

Under SYSTEM menu, System configuration options for general Information, Date &Time, User,
Quick Setup, and System Log can be selected.
2-1-1. MENU > SYSTEM > Information
In the Information box, DVR Name, System Version, Upgrade, Mac Address, and Configuration
options can be selected. Highlight and press
the DVR. Name the DVR by using the virtual keyboard.
To upgrade firmware on the system, save the upgrade file to USB Flash Memory and connect it to
DVR. Once the Device is connected, press Upgrade button to execute the system upgrade.
Upgrade will take approximately 5 minutes. DVR will reboot automatically when the upgrade is
completed.
Note
: DO NOT remove USB Flash Memory or turn off the system during the upgrade. This may
cause system malfunctioning.
Remote Control ID
Entering Remote Control ID allows controlling of multiple DVRs individually by one remote
controller. If the Remote Control ID remains as 0, the DVR will always be controlled by the
remote control.
Video Type
The system automatically detects camera signal types (NTSC/PAL). But you can manually select
in between NTSC/ PAL.
Configuration
System settings can be saved and loaded using Configuration Import/Export option.
Export: Save settings to USB Flash Memory
Import: Load saved settings from USB Flash Memory
Default: Load factory default settings
Note
: Configuration Import does not affect or changes system and network settings.
Network settings will also not be changed when Default configuration is loaded.
at DVR Name to enter or change the name of
23