Using Remote Control - ROHS SV-HVR2800 series User Manual

Using remote control

To use the remote control:
1. STANDBY: Press to turn standby mode ON/OFF.
2. Playback controls:

: Increase rewind speed 2X, 4X, 8X;

: Press to start playback;

: Press to increase fast-forward speed 2X, 4X, 8X;

: Press to slow-down playback by 1/2, 1/4, 1/8;

: Press to pause, then press again to play single frame.
3. MENU: Opens the main menu.
4. Navigation/OK:

: Move cursor in menus up;

: Move cursor in menus right;

: Move cursor in menus left;

: Move cursor in menus down;

OK: In menus, press to confirm selections;
5. Mode: Press to switch between quad and split-screen displays.
6. Number/Channel buttons: While in menus, press buttons 0~9 to enter values;
during live viewing, press to view channels in full-screen.
7. ALARM: Clear alarm output.
8. SWITCH: Switch video output.
9. RECORD: Press to start manual recording.
10. STOP: Press to stop manual recording.
11. +/ - : In menus, press to adjust values.
12. PTZ: Press to open the PTZ control window.
13. EXIT: Close menu windows.
14. MUTE: Turn on / off audio output.
15.
LOGIN / LOCK: If password has been enabled in the setup menu, press to open
the user password login screen.
SV-HVR2800 Series DVR User Manual
8