ROHS Performance Series User Manual page 42

In Motion menu box, Motion Detection function can be configured. Set Motion Detection with its
Sensitivity, View, and Area options.
Sensitivity: Select motion sensitivity from Very Low to Very High.
Area: Define the area for motion detection.
Press Setup under Area column to select motion detection areas. The blocks indicate the area
where motion would be detected.
Select Block: Use arrow keys to move in the screen. Select individual blocks to set motion zones.
Use number keys to select and unselect blocks (When using a mouse, use a left button).
Clear Block: Unselect all blocks inside the box
Select All: Select blocks on the entire screen.
Clear All: Unselect blocks on the entire screen.
View: When enabled, boxes to highlight the motion detection will be displayed on the screen.
In Record tab, each camera‟s recording can be
initiated by single and multi motion detections
from other cameras. Press
cameras to be recorded by motion detections.
In Alarm tab, each camera with motion
detection can trigger single and multi alarms.
Press to select alarms to be triggered by
cameras with motion events.
In Notification tab, each camera with motion
detection can trigger single and multi callback
or emailing sites. Press
email address to be notified by cameras with
motion events.
to select
to enter callback or
41