Thermal Fuse - Nilfisk-Advance Bravo User Manual

Bravo
Changing the HEPA fi lter
5
EN
The HEPA fi lter cleans the exhaust air
DE
from micro particles the dust bag can
not keep. The HEPA fi lter can not be
FR
brushed or washed clean.
1. Open the lid on the machine in the
ES
back.
2. Remove the blow function lid.
3. Take out the HEPA fi lter.
PT
4. Insert the new HEPA fi lter. Check
that the HEPA fi lter is correctly
IT
fi tted.
5. Put the blow function lid back.
NL
6. Put the lid back and close.
SV
Adjust the suction power
NO
Sliding valve on the bent tube
DA The suction power is maximal with the
sliding valve closed and minimal when
all open. Adjust the suction power by
FI
putting the sliding valve in the desired
position.
ZH
Power regulation
The suction power is adjusted on the
power regulator.
6
Parking the tube and nozzle
There are two grooves for parking.
One located on the underside to use
when machine stands on the back,
and the other on the back to use when
the machine is standing on its wheels.
10

Thermal fuse

The machine is fi tted with a thermal
fuse, which prevents the machine from
overheating. If the thermal fuse blows,
the machine automatically switches off
the motor and must cool before it can
be started again.
Restart
1. Turn off the machine and unplug
from the wall socket.
2. See to that nothing blocks the air
fl ow through the bent tube, hose,
tube, nozzle, dust bag or fi lters.
3. Let the machine cool.
4. Plug in the machine again and
push the start button. The machine
will not start until cool enough. If
the machine does not start turn it
off and unplug. Try again in a while.