Advertisement
5.3 Heating with brown coal
The firing up and the first replenishment should be effected using wood (See
section 5.2 "Heating with wood"). The first brown coal briquettes (note max.
quantity) may be placed on strongly glowing embers. You should lay them
centrally on the grate with finger-wide spacing between them and in
accordance with the above information (at nominal temperatures or light load)
for the position of the primary air and secondary air slides.
NOTE
On exceeding the maximum amounts, there is a risk of overheating which could
cause damage to the stove and the danger of a chimney fire.
IMPORTANT:
Damage caused by too large quantities of wood or through the use of
inappropriate woods not recommended in the operating instructions are
excluded from the guarantee.
15
Advertisement
