Table of Contents
Advertisement
TIMER RECORDING
Instant Timer
Recording
(ITR)
I T R
SP
VIDEO
On-Screen
Timer
Programming
* Refer to the illustration on page 26.
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the VCR off after
recording is finished.
1
2
5/8
3
–
+
6
£
™
q
NOTES:
You can only perform ITR using the REC button on the VCR's
front panel.
After you set the time, the previous display reappears.
To check remaining recording time, press REC once during
recording and the remaining time is displayed for about 5
R E C
seconds. Be careful not to press again during this 5 seconds,
or you'll add 30 more minutes to the recording.
You can directly program the VCR's timer to record up to 8
shows, as far as a year in advance. Remember, the clock must
be set before you can program the timer (
1
2
START RECORDING
Press REC.
ENGAGE ITR MODE
Press REC again. ITR blinks and 0:30 appears on the
front display panel.
SET RECORDING
DURATION
If you want to record for more than 30 minutes, press
REC to extend the time. Each press extends recording
time by 30 minutes.
LOAD A CASSETTE
Make sure the record safety tab is intact. If not, cover
the hole with adhesive tape, then load.
The VCR comes on, and the counter is reset,
automatically.
If watching channel 3 or 4, press TV/VIDEO to select
the VIDEO mode. VIDEO is displayed on the front
display panel.
ACCESS PROGRAM SET
SCREEN
Press MENU, then press
OK.
DATE
START
STOP
CHANNEL
PRESS NUMBER KEY(0-9)
PRESS (MENU) TO END ENDSP
CONTINUED ON NEXT PAGE.
25
pg. 5).
PROGRAM 1
- - / - -
- - : - - AM
- - : - - AM
- - SP
OR (5,∞), THEN (OK)
Advertisement
Table of Contents
