Table of Contents
Advertisement
TIMER RECORDING
Instant Timer
Recording
(ITR)
I T R
SP
VIDEO
On-Screen
Timer
Programming
* Refer to the illustration on page 30.
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the VCR off after
recording is finished.
START RECORDING
1
Press REC.
ENGAGE ITR MODE
2
Press REC again. ITR blinks and 0:30 appears on the
front display panel.
SET RECORDING
DURATION
3
2
2
If you want to record for more than 30 minutes, press
REC to extend the time. Each press extends recording
6
time by 30 minutes.
q
5/8
NOTES:
You can only perform ITR using the REC button on the VCR's
front panel.
After you set the time, the previous display reappears.
To check remaining recording time, press REC once during
recording and the remaining time is displayed for about 5
R E C
seconds. Be careful not to press again during this 5 seconds,
or you'll add 30 more minutes to the recording.
You can directly program the VCR's timer to record up to 8
shows, as far as a year in advance. Remember, the clock must
be set before you can program the timer (
LOAD A CASSETTE
1
Make sure the record safety tab is intact. If not, cover
the hole with adhesive tape, then load.
The VCR comes on, and the counter is reset,
automatically.
ACCESS PROGRAM SET
SCREEN
2
Press MENU, then press
OK.
29
pg. 7).
PROGRAM 1
DATE
- - / - -
START
- - : - - AM
STOP
- - : - - AM
CHANNEL
- - SP
PRESS NUMBER KEY(0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
CONTINUED ON NEXT PAGE.
Advertisement
Table of Contents
