Advertisement
Safety information
Before installing your telephone, please read the saftey information and
the chapter „Setting up the telephone".
Never try to unscrew the screws and open the device. You could get in
contact with current-carrying parts. The telephone does not contain any
user-serviceable components. The producer is not liable for damages
caused by actions violating the warranty or security terms.
Installing the telephone
The telephone was produced for standard use conditions. Please do not
install the device
- close to heat sources (air-conditioning, heater, exposure to direct
sunlight).
- in humid rooms (no exposure to splashing water or chemicals).
- nearby devices emitting strong magnetic fields (electrical appliances,
fluorescent tubes, computers, TV sets).
- in dusty rooms.
- in rooms where the device is exposed to vibrations or extreme
variations in temperature.
- Never carry the telephone at the handset or the connection cables.
- Only plug the connectiong cables into the designated receptacles.
- Make sure that the connecting cables are laid in a way that accidents
are prevented.
- If necessary, install additional sockets.
Emergency call function: In rare cases, the function of sending out an
emergency call cannot be guaranteed. This might be the case if e. g. the
telephone network fails or if the radio transmission from the handset to
the base station is subject to interference. If the device is used for people
who are in a critical or life-threatening health condition, you should not
refrain from additional safety means.
Advertisement
