Settings For The Speakers - Sony DAV-JZ8888K Operating Instructions Manual

x [RESET]
You can return the [SET UP] settings other than
[PARENTAL CONTROL] to the default
settings. For details, see "Returning the
[SETUP] settings to the default" (page 88).

Settings for the speakers

[SPEAKER SETUP]
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
SPEAKER SETUP
CONNECTION:
DISTANCE(FRONT):
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE FRONT:
CENTER:
SURROUND:
SUBWOOFER:
x [CONNECTION]
If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer settings are fixed, you cannot change
them.
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center speaker is used.
[SURROUND]
[YES]: Normally select this.
[NONE]: Select this if no surround speakers are
used.
[SUBWOOFER]
[YES]
Note
• When you change the [CONNECTION] setting, the
[ALL FRONT] of [SPEAKER FORMATION]
setting remains the same, but the other settings of
[SPEAKER FORMATION] return to [ALL
FRONT].
x [DISTANCE (FRONT)]
When you move the front speakers, center
speaker, and subwoofers, be sure to set the
parameters of the distance (A) from the
listening position to the speakers.
You can set the parameters from 0.00 to 7.00
1)
meters (0 to 23 ft).
The speakers in the illustration correspond to the
following:
1Center speaker
2Front speakers (L)
3Front speakers (R)
4Subwoofer (L)
5Subwoofer (R)
When you set [ALL FRONT] in the
[SPEAKER FORMATION] setting
YES
YES
YES
YES
When you set [STANDARD] in the
[SPEAKER FORMATION] setting
53
GB