Multi-Brand Remote Control - JVC HR-J481MS Instructions Manual

– Other Functions –

Multi-Brand Remote Control

This remote control can control some functions of remote
controllable TVs, cable boxes, satellite receivers or DVD sets
listed below. Without setting, you can control a JVC TV.
NOTES:
Some unit's brands have more than one code. If the unit does
not function with a specified code, try other codes.
Depending on the type of unit, some or all functions cannot be
operated using this remote control.
It's not possible to operate a unit not equipped with a remote
sensor.
It's not possible to set the remote control for two units at the
same time.
Once you have set the remote control to operate the unit, you
do not have to set it until you replace the batteries from the
remote control.
TV Brand Setting
A
Turn on TV
Turn on the TV using the Power button on the TV or its remote
control.
B
Set TV brand code
A
Press and hold TV.
B
Press the Number keys to enter your TV's brand code.
C
Press OK, and release TV. The TV should turn off.
C
Operate TV
First, press TV to set the remote control to TV mode, then press
one of the following buttons: 1, TV/VCR, TV PR+/–,
(TV Muting), TV %+/–, and the Number keys.
For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
TV BRAND CODE
JVC 01, 23, 24, 25
AIWA 36
BEIJING 22
CCE 02
CHANGHONG 34
DAEWOO 17, 37
FERGUSON 27
FINLUX 30
FUNAI 32
GRADIENTE 15
GRUNDIG 19
HITACHI 10
ITT 28
JINXING 38
KONKA 40
LG/GOLDSTAR 18
^
TV BRAND CODE
MITSUBISHI 03
MIVER 29
NEC 20
NOBLEX 22
NOKIA 31
PANASONIC 04, 11
PEONY 34, 38, 39
PHILICO 10, 17, 21
PHILIPS 02, 42
SAMSUNG 12, 33, 34, 35
SANYO 13, 16
SHARP 06
SONY 07
TCL 41
THOMSON 26
TOSHIBA 08, 14
Cable Box, Satellite Receiver or DVD Brand Setting
A
Turn on the unit
Turn on the cable box, satellite receiver or DVD using the Power
button on the unit or its remote control.
B
Enter brand code
A
Press and hold CABLE/SAT/DVD.
B
Press the Number keys to enter your unit's brand code.
C
Press OK, and release CABLE/SAT/DVD.
C
Operate the unit
First, press CABLE/SAT/DVD to set the remote control to cable
box, satellite receiver or DVD mode, then press one of the
following buttons:
For satellite receiver and cable box . . .
1, TV PR+/–, Number keys.
For DVD. . .
1, PLAY (4), STOP (8), PAUSE (9), FF (5), REW (3), w e
(2 6) keys.
For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
To change the unit's channels, press TV PR+/– or the Number
keys. (The PR+/– button can be used to change the recorder's
channels only.)
CABLE BOX OR SATELLITE
RECEIVER BRAND
JVC
AMSTRAD
BT
CANAL+
CANAL SATELLITE
D-box
ECHOSTAR
FINLUX
GALAXIS
GRUNDIG
HIRSCHMANN
ITT
JERROLD
KATHREIN
LUXOR
MASPRO
NOKIA
PACE
PANASONIC
PFT
PHILIPS
PHONOTREND
SALORA
SKYMASTER
TPS
VIDEOWAY
WISI
DVD BRAND
JVC
PANASONIC
PHILIPS
TOSHIBA
CODE
72, 73,
60, 61, 62, 63, 92
72
81
81
85
51, 78, 79, 80, 82
68
69, 88
64, 65
64
68
01, 04, 06, 11, 12, 15, 28, 75
70, 71
68
70
68, 87
67, 86, 92
13, 14, 74
69
66, 84
69
68
69
83
03, 09, 22, 76, 77
64
CODE
55
58
56
57