Table of Contents
Advertisement
Arming Keys
Three arming keys are available: Full, Part and Perimeter. These keys arm the system
using one of the three arming methods. One-key Arming is an option that is programmed
by your installer. If this option is disabled, you must also enter a user code when arming.
Simultaneously pressing the Full and Perimeter buttons generates a panic alarm.
Home Automation On/Off Keys
Pressing one of the Home Automation keys followed by the unit number (01-16) enables
you to control lights and appliances in your home.
Cancel
The Cancel key clears the keypad in the event that you pressed a key by mistake.
For example, when entering your code you enter a wrong digit, the system waits for you
to enter all four digits before it decides that the code is incorrect. Pressing the Cancel key
causes the keypad to disregard what was previously entered enabling you to start again.
Battery Status LEDs
Every time a key is pressed, one of the Battery Status LEDs is lit. When the battery
needs to be replaced, the red Low Battery LED is lit.
-8-
Advertisement
Table of Contents
