Infinite ZI250C User Manual page 27

Scheduling
Sensors
Service Call
SMS Command
SMS Confirmation
Stop
Communications
System Status
Indicators
Tones
TWA
TX
TX List
TX Test
Unbypass
User Code
User TWA Code
Walk Test
Zone
Zone Bypassing
S
A Home Automation feature that switches HA units on and off
automatically according to pre-set times.
The devices installed around the home that alert the panel in the
event of an alarm.
A feature that enables the user to contact the monitoring service and
talk to an operator via the control panel.
An SMS message sent to the control panel that causes the system to
perfotm a specific function.
An SMS message sent to the user confirming that the SMS
command has been performed.
An operation that clears all communication buffers and stops the
transmission of any pending messages to the monitoring service.
Luminous indicators on the front panel that provide information on
the arm and power status of the system.
T
Chimes sounded by the control panel's internal or external siren.
Two-Way Audio (abbr.)
Transmitter (abbr.)
A service feature that lists all the system's registered transmitters,
their last recorded status and signal strength.
A service feature that displays the source of the last received
transmission.
U
The restoral of a bypassed zone to its original state.
A four-digit code that grants access to certain system functions such
as arming and disarming the system.
A user code that enables Two-Way Audio communication.
W
A mode that enables sensors to be tested without generating an
alarm.
Z
A protected area within the security system.
See Bypassed Zone
-27-