Chapter Two: The User Interface; Front Panel Keypad - Infinite ZI250C User Manual

Chapter Two: The User Interface

There are several methods you can use to operate the system. Apart from the keypad on
the front panel, your system may include a number of peripheral devices such as
keypads and keyfobs.
This chapter provides a brief introduction to each of the devices you can use to operate
the system. It is important that you familiarize yourself with these devices before reading
the following chapters that shall describe system operation in further detail.

2.1: Front Panel Keypad

The infinite's front panel keypad is the main user interface that provides you with all the
functions you need to control your security system.
LCD
Display
Arming
Keys
Alpha-
numeric
Keypad
Home
Automation
Keys
System Status Indicators
The System Status indicators
provide essential information on
the status of the system such
as arm, disarm, alarm and
power failure conditions.
System Trouble Indication
In the event that the system detects a trouble condition, "System Trouble" appears on the
display. To identify the problem, scroll through the trouble list by pressing
the trouble list also silences system trouble tones that may be sounded if enabled in
programming. When the trouble condition is restored, it is removed from the system
trouble list.
Service Call Button
The Service Call button enables you to contact the monitoring service
and talk to an operator.
Press and hold down the Service Call key for a few seconds to initiate
a service call.
On during arm. Off during disarm.
Flashes after alarm.
On when power is connected. Off when power
is disconnected. Flashes if there is a problem
with mains power or the backup battery.
-6-
System
Status
LEDs
Menu
Navigation
Keys
. Scrolling