Table of Contents
Advertisement
7.6: Service Menu
The Service menu includes various functions that enable you to test your system
effectively. You can gain access to the Service menu using the Master code.
Set Time & Date
To set the time:
1.
From the Service menu, select Set Time/Date, Set Time [7011].
2.
Enter the current time.
3.
Press
; the time is modified.
To set the date:
1.
From the Service menu, select Set Time/Date, Set Date [7012].
2.
Enter the current date.
3.
Press
; the date is modified.
The format of the time and date is defined by your installer in programming. If you are setting
the time in 12hr format, use the key to toggle between AM and PM.
Siren Tests
To test the external siren:
•
From the Service menu, select Ext. Siren Test [702]; the external siren is
sounded briefly.
To test the internal siren:
•
From the Service menu, select Int. Siren Test [703]; the internal siren is
sounded briefly.
Speaker Test
To test the speaker:
•
From the Service menu, select Speaker Test [704]; a short sequence of chimes
are sounded from the speaker.
Walk Test
Walk Test mode enables you to test all the sensors registered to your system without
triggering an alarm.
To initiate Walk Test mode:
1.
From the Service menu, select Walk Test [705]; a list of registered sensors
appears.
2.
Trigger each sensor; when the system receives a successful transmission from
a sensor, the sensor is removed from the list.
3.
When all the sensors are removed from the list, End Walk Test is displayed.
Transmitters
The Transmitters menu offers two utilities, TX List and TX Test.
The TX List comprises all registered transmitters and their last reported status.
To view the TX list:
1.
From the Service menu, select Transmitters, TX List [7061]; the first transmitter
on the list is displayed.
2.
Using the arrow buttons, scroll through the transmitter list.
3.
When you have finished viewing, press
to exit the list.
-21-
Advertisement
Table of Contents
