Operator Logo Assembly - Sony Ericsson K320 Working Instruction, Mechanical

3.26 Operator Logo Assembly

REMOVAL
Follow the 2.1.1 – 2.1.5 Disassembly instructions!
B
E CAREFUL NOT TO DAMAGE THE PHONE DURING THIS
!
PROCEDURE
Position the dentist hook in the notch of the UI module
frame and remove the operator logo assembly.
INSTALLATION
U
SE A NEW OPERATOR LOGO
Clean the surface with isopropyl alcohol.
Place the operator logo assembly on the UI module frame
and press with your fingers for a few seconds to secure a
good fit.
Follow the 4.1.1 – 4.1.5 Reassembly instructions!
3/000 21-1/FEA 209 544/124 D
©
Company Internal Sony Ericsson Mobile Communications AB
!
Working Instruction, Mechanical
41(51)