Storing Channels Manually; Input Channel - JVC HR-J255EK Instructions Manual

32
1
4
NUMBER
7
1
MENU
ATTENTION
After you have stored channels manually, be sure to
perform Guide Program Number Set (
get proper results from Video Plus+ timer recording.
2 3
2
5 6
8 9
0
4
?
OK
pg. 38) in order to
SUBSIDIARY SETTINGS (cont.)

Storing Channels Manually

To store channels that were not stored during Auto Set Up (
8) or Auto Channel Set (
ACCESS MAIN MENU
1
Press MENU.
ACCESS CONFIRMATION
SCREEN
2
Press %fi to place the pointer next to "MANUAL CH
SET", then press OK or
appears.
SELECT POSITION
3
Press % fi until an open
position in which you
want to store a channel
begins blinking, then press
OK. The Manual Channel
Set screen appears.

INPUT CHANNEL

4
Press the NUMBER keys to
input the channel number
you want to store.
For HR-J255ES Owners:
First press % fi to select the
band, either CH(regular) or
CC(cable), and press
then input the channel
number.
Input "0" before any
single number entries.
To input the registered
station name
(ID – pg. 35), press
until "----" (ID setting) begins blinking, then press % fi.
For fine tuning adjustment, press
blinking, then press % fi. While tuning, "+" or "–"
appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK and the Confirmation screen appears.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
To change positions, see "Change Station Preset
Position" ( pg. 33).
If you wish to set station names other than the ones
registered in your recorder,
page 34.
pg. 30).
. The Confirmation screen
(Ex.) To store in position 6.
PR CH ID PR
01 26 BBC1 07
02 33 BBC2 08
03 23 ITV 09
04 30 CH4 10
05 37 CH5 11
06 –––– 12
[ 5 ∞ ]
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
PR CH ID FINE
6 CH21 –––– +/–
[0–9] : SELECT
] : CURSOR +=
[
,
: OK
[MENU] : EXIT
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
until "+/–" begins
"Set Stations (B)" on
pg.
CH ID
––––
––––
––––
––––
––––
––––