Stainless Steel Vent - Cadet 40-120 Installation And Service Manual

3
General venting

Stainless steel vent:

This product has been approved for use with stainless steel
using the manufacturers listed in Table 3G.
Use only the materials, vent systems, and
WARNING
terminations listed in Tables 3G and 3H.
DO NOT mix vent systems of different
types or manufacturers. Failure to comply
could result in severe personal injury,
death, or substantial property damage.
The installer must use a specific vent starter
NOTICE
adapter at the flue collar connection,
supplied by the vent manufacturer to
adapt to its vent system. See Table 3H for
approved vent adapters. Discard CPVC
starter piece.
Installations must comply with applicable
NOTICE
national, state, and local codes. Stainless
steel vent systems must be listed as a
UL-1738 approved system for the United
States and a ULC-S636 approved system
for Canada.
Table 3G Stainless Steel Vent Pipe and Fittings
Approved Stainless Steel Vent Manufacturers
Make
Dura Vent (M & G Group)
Z-Flex (Nova Flex Group)
Heat Fab (Selkirk Corporation)
*Use of FasNSeal Flex smooth inner wall vent is to be used in vertical or near vertical sections only, taking precaution to ensure
no sagging occurs of the vent system. Connect to the FasNSeal rigid vent using specially designed adapters and sealing method,
see manufacturer's instructions.
Table 3H Approved Stainless Steel Terminations and Adapters
ProTech
FasNSeal
Model
**Boiler Flue
Adapter Termination
300716
(Vent)
FSBS3
40 - 120
FSRC3(R.C)
300715
(Intake Air)
*The stainless steel venting option is only available in 3" vent diameters.
(continued)
FasNSeal Vent / FasNSeal Flex* Vent
Heat Fab
Saf-T Vent
Intake
*Boiler Flue
Air
Adapter Termination
Termination
WB50210
(Vent)
9392
303889
5300CI
9301PVC
(Intake Air)
Installation & Service Manual
Installation of a stainless steel vent system
NOTICE
should adhere to the stainless steel vent
manufacturer's installation instructions
supplied with the vent system.
Figure 3-9 Near Boiler Stainless Steel Venting
Model
Z-Vent
Saf-T Vent
Intake
**Boiler
Air
Adapter
Termination
2SVSLPVC3
(Vent)
9314TERM
2SVSLA03
(Intake Air)
VENT
3" S.S. ADAPTER
IMG00226
Z Flex
Z-Vent
Flue Intake Air
Termination Termination
2SVSTP03
2SVSTEX0390
2SVSRCX03
21