Timer Recording; Showv Iew Timer Programming - JVC HR-DD858E Instructions Manual

26
EN
S
HOW
Timer
Programming
Before performing S
HOW
Make sure that the recorder's built-in clock is set
properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
1
4
NUMBER
7
PROG
1
V
IEW
V Timer Programming:
IEW
– –:– –
2 3
2
5 6
8 9
0
4
OK

TIMER RECORDING

With S V , timer programming is greatly simplified
HOW IEW
because each TV programme has a corresponding code number
which your recorder is able to recognize.
ACCESS SHOWVIEW SCREEN
1
Press PROG.
The front display panel looks like this:
ENTER SHOWVIEW NUMBER
2
Press the NUMBER keys to
enter the S V
HOW IEW
number of a programme
you wish to record.
If you make a mistake,
press and input the
correct number.
The S V number you enter appears on the front
HOW IEW
display panel:
The display panel can show only a 4-digit number.
ACCESS SHOWVIEW PROGRAM
SCREEN
3
Press OK, and the
S V Program screen
HOW IEW
appears (if you're just
starting out, "P1" appears).
The display panel shows the
programme start time.
Pressing changes the
display to the programme
stop time, then the date and
channel position.
IMPORTANT
Make sure the channel position number you wish
to record is displayed; if not, see "S
on page 53 and set the Guide Program number for
that S V number correctly.
HOW IEW
If the number you entered is invalid, "ERROR" appears
on the screen and "Err" appears on the display panel.
Press and input a valid S
If the "GUIDE PROG SET" screen appears, see
"ATTENTION – Regarding Guide Program Number
Set" on page 27.
SHOWVIEW
[0 – 9] =
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
SHOWVIEW
1 2 3 4 5 6 7 8
[0 – 9] =
[ ] : DELETE
[PROG] : EXIT
– P1 –
SHOWVIEW 123456789
START STOP
=
21:00 22:00
SP VPS/PDC OFF
DATE TV PROG
25.12 1
ARD
: OK
SP
V Setup"
HOW IEW
V number.
HOW IEW