Table of Contents
Advertisement
SYSTEM CONNECTIONS
Connection To
A Stereo
System
Speaker
Mains outlet
MAKE CONNECTIONS
1
Connect the AUDIO OUT L and R connectors on your
video recorder to the AUX IN or TAPE MONITOR
terminals on your stereo system's receiver or amplifier.
NOTES:
When connecting your recorder's audio output connectors to
a stereo amplifier, make sure you connect L and R correctly.
If you can receive NICAM TV broadcasts in your area, this
recorder can record them independently of the TV set and
play them back through the connected stereo system.
When listening to sound through the connected stereo
system, turn the TV's volume down completely.
FM Tuner
CD Player
Stereo Amplifier
I
AUX IN or TAPE MONITOR
Speaker
Television
These instructions enable you to connect your video recorder to
your Hi-Fi stereo system (if you have one) and listen to the
soundtrack through the stereo.
AV1 IN/OUT
R
AUDIO
AV2 IN
PAUSE
AUDIO OUT
CAUTIONS:
This recorder has a dynamic range of more than 80 dB with
regards to its Hi-Fi audio capability. It is recommended that
you check the maximum level if you are going to listen to the
Hi-Fi audio signals through a stereo amplifier. A sudden surge
in the input level to the speakers may damage them.
Some speakers and televisions are specially shielded to
prevent television interference. If both are of the non-shielded
type, do not place the speakers adjacent to the TV set as this
can adversely affect the video playback picture.
Audio Cable (not provided)
ANT. IN
L
OUT
RF OUT
Back of Recorder
39
Advertisement
Table of Contents
