Maintenance And Service; Trouble Shooting - Cello C 3298F Instruction Manual

32” wide screen lcd tv with dvb & dvd
Table of Contents

Advertisement

Trouble shooting

Do not use other functions that are not mentioned in this user's manual.
In case a problem occurs with your LCD TV, please take the following steps first.
If you still have the problem, turn the power off and contact your dealer or an authorized service center.
Problem
No power to TV.
The screen appears too
slowly after the power is turned on.
Screen is too bright or too dark.
Screen is too large or too small.
Stripes appear on the screen
and it shakes.
Blocky image or image stops intermittently
Screen appears, Voice is not heard
Remote control does not work
This LCD TV is for household use and registered as harmless on electromagnetic waves.
Therefore, you can use it in every location as well as residential areas.

Maintenance and Service

Check all connections.
This problem occurs for a brief time in the process of
image elimination processing in order to hide temporary screen noise
that occurs when the power is turned on. But if the screen does not
come after 1 minute contact your dealer or an authorized service
center.
Perform brightness adjustment or Contrast adjustment.
Adjust the screen size.
Maybe due to interference from mobile phones, hairdryers or electric drills
Check all aerial connections. Try using aerial booster.
1. Press the "MUTE"button.
2. Increase the sound level by pressing volume adjustment button.
3. Check if sound terminal of external input is connected properly.
4. Check if audio cables are connected properly.
5. Select and check the other input.
If the sound still does not work and the other channels are the
same after you have done as the above, contact your dealer or
an authorized service center.
1. Check if main power is On.
2. Check that the batteries of the remote controller were loaded
properly.
3. Check to see if any obstacle exists between the LCD TV and
the remote control , then remove it, if any.
4. If the batteries have no power, replace them with two new
batteries.
5. Ensure the remote control is in TV mode by pressing the TV
button.
21
Action

Advertisement

Table of Contents
loading

Table of Contents