Table of Contents
Advertisement
Customizing the TV Settings
ATV Manual Tuning
Storage To
Current CH
Search
Fine-Tune
Skip
Frequency
Press RED button to save all the setups you have changed.
Program Edit: Press
button to enter the submenu as the following picture.
SWAP
SWAP
Delete: Select a channel and press the red button on the remote control, Delete will appear on the right
of the program edit menu next to the channel you have chosen. Press the red button again to confirm
the delete, the channel will be deleted. However if you decide not to continue to delete press the
menu button to quit.
SWAP : Select a program, and press YELLOW button, then you can use
position of the program, press YELLOW again to confirm the change. Press menu to exit and it will
automatically save the current set.
Skip: Select a channel and press the blue button to label the channel, as long as the channel has a skip label
it will be skipped when searching through the channels with the CH+/- buttons.
Note: The function SWAP can not be used in DTV mode.
CI Information
Please contact your "pay perview" provider who can supply a viewing card and cam unit with
instructions for their use.
Application
Press
button to enter the submenu.
Select a position to store the program.
Select a program you want to tune.
Press
and
buttons to manual search.
Press
and
buttons to fine-tune.
Select "Yes" to skip the program when you
scan the programs by CH+/-
Display the current channel's frequency.
11
and
buttons to change the
Advertisement
Table of Contents
