Advertisement
Driver Installation
Windows 2000/XP Service Pack 1 and 2
1. Switch on your computer.
2. Plug the USB cable into the CardReader and the USB A type to a free USB port.
3. The CardReader will be recognized and you can start using the device
immediately.
The included CD contains an additional feature for your card reader. To display
the removable disks as icons, install the software as follows:
1. Insert the driver CD in the CD ROM drive.
2. Open Windows Explorer, select: CD-drive\ Driver\Windows Driver\Setup.exe
3. Click "ok".
4. Choose "Yes, restart computer" and click "Finish".
5. After restart, the Software is installed.
Windows 98/98SE/ME
1. Switch on your computer.
2. Please do not connect the CardReader yet.
3. Insert the driver CD in the CD ROM drive.
4. Open Windows Explorer, select: CD-Laufwerk\Driver\Windows
Driver\Setup.exe
5. As soon as the message appears "connect the CardReader", plug the USB
cable into the CardReader and the USB A type to a free USB port. After that
click on "ok".
6. Choose "Yes, restart computer" and click "Finish".
7. After restart you can start using the device immediately.
-2-
Advertisement
