Driver Installation - DeLOCK Multipanel 5.25" User Manual

1. Turn off your PC, and unplug the power cord.
2. Open the housing.
3. Remove the panel from the available 5.25" bay.
4. Insert the multipanel into the bay and screw the multipanel to the housing.
5. Connect the cables of the multipanel to the Mainboard resp. outside of the
housing.
6. Reattach the housing, and connect the power cord to the AC adapter.

Driver Installation

Windows 2000/XP
1. Switch on your computer.
2. The Multipanel will be recognized and you can start using the device
immediately.
Windows 98/ME
1. Switch on your computer.
2. Afterwards, Windows displays the Hardware wizard.
3. Click on "cancel".
4. Put the driver CD in the CD ROM drive.
5. Open the folder: "Driver V1.26.\Setup_1.26", click "Next".
6. As soon as the message appears "Please Plug in the Driver....", click on "ok".
7. Choose "Yes, restart computer" and click "Finish".
- -