Place right-hand brake caliper
on brake disk.
Tighten screws 2 to the speci-
fied tightening torque.
Brake caliper on tele-
scopic forks
28 lb/ft (38 Nm)
Insert ABS sensor in its socket
and install screw 1.
Remove adhesive tape from
wheel rim.
Operate brakes several times
until brake pads contact brake
disk.
Firmly compress spring forks
several times.
Tighten right axle clamping
screws 1 to specified tight-
ening torque.
Pinch bolt of quick-re-
lease axle
Tightening sequence: 2x
each side, alternately
14 lb/ft (19 Nm)
Removing rear wheel
Make sure ground is level and
firm and place motorcycle on a
suitable auxiliary stand.
8
107
z