Initial Settings; Tuner Set - JVC HR-A230E Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-A230E:
Table of Contents

Advertisement

6

Tuner Set

Your recorder needs to memorise all necessary stations in
channel positions in order to record TV programmes. The Auto
Tuning System automatically assigns all receivable stations in
your area to call them up with the TV PROG. buttons without
going through any vacant channels.
The following procedure describes how to select automatic
channel setting.
TURN ON THE RECORDER
1
Press OPERATE.
ACCESS CH. SET DISPLAY
2
Press and hold CH SET for more than 2 seconds.
"AUTO" appears on the front display panel.
If you own the A237E or A437E . . .
. . . go directly to step 3.
If you own the A230E, A233E, A430E or A433E . . .
. . . skip to step 5.
ACCESS COUNTRY DIS-
PLAY
3
Press OK and the Country display appears on the front
display panel.
SELECT COUNTRY
4
Press PUSH JOG %fi to select your country's name.
The available country names appear in the following
order:
"AUT" (Österreich)
"BELG" (Belgium)
"DEUT" (Deutschland)
"DK" (Danmark)
"ESP" (España)
"GRCE" (Greece)
"ITA" (Italia)
• If you own the A237E or A437E and you selected
"BELG" or "SUIS" above . . .
. . . refer to "INFORMATION" at the end of this page.
START AUTO CHANNEL
SET
5
Press OK and "AUTO" blinks on the front display panel.
If you own the A237E or A437E and you selected
"BELG" or "SUIS" in step 4 . . .
. . . refer to "INFORMATION" at the end of this page.
6
7
NOTES:
Fine tuning is performed automatically when you select
"AUTO" in step 2. If you want to perform it manually, refer to
page 23.
To set the tuner manually, refer to "Storing Channels Manu-
ally" (
"OTHR" (Others)
"SWED" (Sverige)
"SUOM" (Suomi)
INFORMATION
"SUIS" (Suisse)
If you own the A237E or the A437E and you selected "BELG" or
"PORT" (Portugal)
"SUIS" in step 4, you need to enter the language used in your area.
"NOR" (Norsk)
This ensures that stations broadcasting programmes in your language
"NL" (Nederland)
will be stored in the highest channel positions. Once you select a
language, the recorder selects the region.
After pressing OK in step 5, perform the following procedure:
1. Press PUSH JOG%fi to select your language.
The available languages appear in the following order:
2. Press OK, then go to step 6.

INITIAL SETTINGS

ACCESS CONFIRMATION
DISPLAY
The channel position, channel and station name
[A237E, A437E only] of the stations located by your
recorder appear in a Confirmation display (
(for HR-A237E, A437E)
Channel Position
Channel
(for HR-A230E, A233E, A430E, A433E)
Ch=Regular CC=Cable
Confirm all the stored stations by using PUSH JOG % fi.
If you own the A230E, A233E, A430E or A433E . . .
. . . you can manually input the station name
(
pg. 23).
RETURN TO NORMAL
DISPLAY
Press CH SET.
Using the Confirmation display, you can skip or add channel
positions, enter station names and perform other operations.
Refer to page 22 for the procedures.
Depending on the reception conditions, the stations may not
be stored in order, and (for A237E or A437E only) the station
names may not be stored correctly.
If you own the A233E or A433E and use a decoder,
for information on scrambled broadcasts.
pg. 22).
• Users living in Belgium should select "DEUT", "FRA"
or "NL".
• Users living in Suisse should select "DEUT", "FRA" or "ITAL".
"ENG" (English)
"DEUT" (Deutsch)
"FRA" (Français)
"ITAL" (Italiano)
"CAST" (Castellano)
pg. 24).
Station Name
pg. 22
"DK" (Dansk)
"SUOM" (Suomi)
"NOR" (Norsk)
"SWED" (Svenska)
"NL" (Nederlands)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents