Dvd Operation; Playback; Volume Control - Flex LD-185DCH Manual

DVD OPERATION

PLAYBACK

DVD MPEG4 SVCD VCD
1. Power on and switch signal source to DVD mode and the unit begins to work.
2. Place the disc (with label side facing users) to the door and the unit will draw in the disc
automatically.
The unit begins to read disc information.

3. Press [PLAY] button to begin playing disc.
When the unit playing a disc, press [►] button the firs time and the unit enters pause

state, while press [►] button again and the unit resumes playback.
4. Press [STOP] button to stop playing.
When the unit is playing a disc, press [

stop state, while press [
At the pre-stop state, if you press [►] button, the unit will continue to play from the

stopped point.
At the stop state, if you press [

of the disc.
Press [] button when playing MPEG4 discs and the unit enters stop state directly.

5. Press [ ] button to take out disc.
6. When finishing playing, switch signal source to other working state and press
[ ] button to make the unit enter standby state. Please pull out the power plug from
power socket when not using the unit for a long time.
[ ] button is effective only when selecting DVD signal source. In other signal

source, such as TV, AV, etc, this button is invalid.

VOLUME CONTROL

DVD MPEG4 SVCD VCD
1. Press [VOL+/VOL-] buttons to adjust volume.
2. Press [VOL+/VOL-] buttons on the remote control of this unit.
Press [VOL+] button to increase volume; press [VOL-] button to decrease volume;

the maximum volume is 100.
CD
STANDBY PO WE R MU TE
P.MODE S.MODE SL EE P
1 3
2
 ] button the first time and the unit enters pre-
 ] button again and the unit enters stop status.
► ] button, the unit will play from the beginning point
CD
CH - VOL+
CH + VOL-
TEXT MIXINDDEVXD/USB
PLAY
I/ II
CANC EL RE VE AL HO LD SI ZE
- 29 -
FAV EJECT
SCAL ER
CALL
VOL+/ -
STOP