Vga Menu Setup - Flex LD-185DCH Manual

VGA MENU SETUP

The VGA mode supported up to 1680X1050@75Hz (for 22"), you can use this unit as a multimedia
PC monitor. When this unit works in VGA mode, the following setup can be done.
Press [SETUP] button to enter main section. Press [▲/▼] button to select sections and then press
[►] button or [OK] button to enter. If all is done, please press [SETUP] button twice to exit and your
setup data will be saved automatically.
VGA Setup
Select VGA Setup item to adjust such parameters as Horizontal Pos., Vertical Pos., Size, Phase,
Auto Adjust.
NOTE
When your PC goes into standby mode, the screen will show as bellow. This unit will go into sleep
mode if no signal input in 5 minutes. In this mode, the indicator will remains green, and the screen
will turn off. You can wake it up by waking up your PC or pressing [SETUP] or [SOURCE] button on
the remote control.
SOUND
Select SOUND item to adjust sound parameters. You may adjust Sound Mode, Treble, Bass, Balance
and Auto Volume.
SETUP
VGA
No Signal
4:31
Auto Volume Off
SETUP
- 19 -